"ДП УКРГАЗТЕХ"

+38 (044) 492-76-21, 334-73-03, dpugt@ukrgas.tech, dpugt@dgt.com.ua

Quick intrusion notification device UBOP

PURPOSE

( full specifications are in the manual for the device )

1. The UBOP intrusion alert device is designed for use in security systems alarms and warnings both at industrial and municipal facilities and can be used in conjunction with existing standard security systems.
2. UBOP refers to remote signaling means and is intended for:
– notification via GSM-radio channel when an alarm sensor is triggered (violation of the integrity of the circuit, penetration);
– ensuring uninterrupted power supply of the built-in controller and sensors;
– can work with any standard security alarm sensors.
3. UBOP is not a means of measurement.
4. UBOP operation is allowed at air temperature from minus 40 to plus 60 °С.

TECHNICAL DETAILS1

1. Involved GSM frequency range – 900/1800/1900 MHz.
2. The speed of data exchange with external devices at speeds from 1200 to 115200 bps.
3. Power supply parameters of the UBOP device:
– from an external source of direct current voltage . . . . . . . . . . . . . . . . . – 6.3 V
– output current is not less than . . . . . – 2 A
– from a battery (2 pcs.) with an output voltage of 6.3 V and a capacity of at least 4 A/h.
4. The electrical power consumed from the power source is no more . . . . – 1 W
5. Battery life in standby mode (with an IR detector connected), at least 100 hours;
6. Overall dimensions of UBOP do not exceed 280 x 200 x 100 mm.
7. The mass of the UBOP device does not exceed 2.5 kg.
8. The service life of the UBOP device is at least 5 years.

INSTALLATION & SERVICE

1. The UBOP device is made in a plastic wall-mounted case and consists of a controller with GSM radio module,  unit of an uninterruptible power supply (batteries) of the UBOP or a remote power supply unit operating from AC 220 V.
2. The UBOP device can work with any standard burglar alarm sensors and as agreed with the UBOP customer can be equipped with standard motion detectors, security loops . . .
3. The standard delivery set of the UBOP device includes:
– dialing 3 different phone numbers;
– arming, disarming and configuration are performed from a mobile phone;
– when the sensor is triggered or the security circuit is opened, the armed controller makes 3 attempts cyclic dialing to preset numbers.
4. The company provides warranty service for UBOP within 24 months and after-sales service throughout service life.