"DP UkrGasTech" LTD

+38 (044) 492-76-21, +38 (044) 334-73-03 dpugt@ukrgas.tech, dpugt@dgt.com.ua

Interface converter RS232/BELL202

  • Home
  • Interface converter RS232/BELL202

PURPOSE

( full specifications are in the manual for the device )

1. The RS232/BELL202 interface converter is designed to transmit a signal in the BELL202 standard as modem via a dedicated two-wire line in half-duplex mode and a power supply voltage driver for peripheral devices
2. The converter is used to organize the exchange of digital information between the PC and the converters-correctors PC-2, FLOUCOR, PM-3V and digital measuring sensors supporting “Open field HART-protocol”.
3. The transmitter is not a measuring instrument.

TECHNICAL DETAILS

1. Power supply parameters from an external DC source:
– rated supply voltage – 12 V
– allowable values​from 8 to 16 V (maximum – 27 V, not tested).
– own consumption current . . . . . – no more than 15 mA.
– consumption power – no more than 0.6 W.
2. AC power options:
– rated voltage ~220 V, frequency 50±1 Hz.
– power consumption – no more than 3.2 VA.
3. The converter provides:
– setting the output voltage of the line shaper of your choice . . . . – from 15.8±0.3V to 23.5±0.5V;
– maximum line current . . . – no more than 50 mA.
– the number of formed lines for connecting peripheral devices . . . . . . . – 2.
4. Switching receive/transmit:
direct control – HRTS signal (RS232);
– automatic switching – the presence of a data stream from a PC.
– transmission mode – without buffering.
5. The speed of digital information exchange is 1200 bps.
6. The overall dimensions of the transducer do not exceed 105 x 90 x 60 mm.
7. The mass of the converter does not exceed – 0.4 kg.
8. Converter service life – 12 years.

INSTALLATION & SERVICE

1. RS232/BELL202 interface converter is designed for operation outside hazardous areas indoors at ambient temperature from minus 40 to plus 60 °С.
2. Degree of protection against environmental actions marking IP30.
3. The company provides warranty service for the RS232/BELL202 interface converter within 24 months and service service throughout the entire service life.

DOCUMENTATION  (Manual)

RS232/BELL202 interface converter.