"DP UkrGasTech" LTD

+38 (044) 492-76-21, +38 (044) 334-73-03 dpugt@ukrgas.tech, dpugt@dgt.com.ua

Filter-Settler   FO-1

  • Home
  • Filter-Settler   FO-1


( full specifications are in the manual for the device )

1. The FO-1 settling filter is designed to purify liquids (including methanol or ethyl mercoptan) from mechanical impurities non-aggressive to the internal elements of the filter housing and to extend the life of the filter its body is made of stainless steel.
2. The filter is used to clean the odorant for use in gas odorization complexes of gas distribution stations (GDS).
3. The FO-1 settling filter withstands the effect of pressure overload equal to the maximum allowable excess pressure in the pipeline, but not more than 6.3 MPa.


1. The FO-1 settling filter is made in a metal case of which a polymer filter is installed, providing purification of liquids from mechanical impurities
2. Overall dimensions of the Filter FO-1 no more than – 190 x 330 x 150 mm
3. The weight of the FO-1 filter is not more than . . . – 8 kg
4. Service life of the FO-1 Filter. . . – 10 years.


1. The FO-1 settling filter, when used on a gas odorization unit, is installed on the mounting panel and is attached to it with two M5 bolts.
2. The nominal passage of the taps installed on the panel and the connecting branch pipes of the panel is 10 mm.
3. Warranty period of operation Filter-settler FO-1 – 24 months from the date of putting the filter into operation.


Cleaning filter FO-1