"DP UkrGasTech" LTD

+38 (044) 492-76-21, +38 (044) 334-73-03 dpugt@ukrgas.tech, dpugt@dgt.com.ua

ADUK valve control adapter

  • Home
  • ADUK valve control adapter

PURPOSE

( full specifications are in the manual for the device )

1. ADUK valve control adapter is part of the adjustment complex supply of fuel gas to the natural gas heater “FLAME-04” and is designed to control the fuel gas cut-off valve when operation of the complex in the “Start” and “Temperature control” modes.
2. The level of protection against environmental actions is not lower than IP54.
3. The ADUK adapter is not a measuring instrument.
4. Operation of the ADUK valve control adapter is allowed at ambient temperature from minus 40 to plus 60 °С.

TECHNICAL DETAILS

1. Power supply of the ADUK valve control adapter is carried out from an external DC power source voltage . . . . . . . – 24+2.4 V
2. Electrical parameters of executive circuits (discrete outputs) of the “open drain” type:
– switching voltage . . . . . . – 10 – 27 V
– switched current . . . . . . . – 12 mA
3. Discrete input power supply parameters:
– voltage . . . . . . . . . . . – 24 V
– input current . . . . . . – 10mA
4. The overall dimensions of the adapter do not exceed 290 x 200 x 80 mm.
5. The weight of the adapter does not exceed . . . – 3 kg.
6. adapter life . . . . . . . – 12 years.

INSTALLATION & SERVICE

1. ADUK valve control adapter is made in a plastic case with brackets for mounting on a DIN rail. In this case, the converter must be protected from direct exposure to precipitation.
2. The company provides warranty service for the ADUK valve control adapter for 24 months and service service throughout the entire service life.

DOCUMENTATION  (Manual)

ADUK valve control adapter.