"ДП УКРГАЗТЕХ"

+38 (044) 492-76-21, 334-73-03, dpugt@ukrgas.tech, dpugt@dgt.com.ua

Interface converter RS232/RS232 isolating

PURPOSE

( full specifications are in the manual for the device )

1. RS232/RS232 isolating interface converter is designed for galvanic decoupling of RS232 interface physical signals and is used for organization of digital information exchange via RS232 interface between industrial controllers and PC.
2. The converter provides galvanic isolation of the power supply. Insulation strength – 500 V AC, 50 Hz for 60 seconds.

TECHNICAL DETAILS

1. Power supply of the Isolating RS232/RS232 Interface Converter is carried out from the service signals (DTR, RTS, TX) of the RS232 interfaces or from connected external DC power sources with a voltage of 10 – 14 V instead of the DTR signals.
– own current consumption of the converter. . . . . . . – no more than 4 mA.
– maximum power consumption. . . . . . . . . . . . . . . . . . – no more than 0.15W

2. The converter provides stable conversion for baud rates up to 38,400 bps
3. The transmission delay introduced by the signal converter is – no more than 2 μs
4. The converter has short circuit protection for all interface outputs
5. Overall dimensions of the transducer – no more than 85 x 35 x 55 mm
6. The mass of the converter does not exceed – 0.1 kg
7. Service life of RS232/RS232 interface converter. . . . . . – 12 years.

INSTALLATION & SERVICE

1. The RS232/RS232 interface converter is designed for operation outside hazardous areas in rooms at an ambient temperature of minus 40 to plus 60 °C
2. Degree of protection against environmental actions marking IP30
3. The company provides warranty service for the converter within 24 months and after-sales service during the entire service life.

DOCUMENTATION  (Manual)

RS232/RS232 isolating interface convert