PURPOSE
( full specifications are in the manual for the device )
1. The controller-interface converter belongs to the group of microprocessor devices and is equipped with a microcontroller and memory for data storage
The interface converter is designed to work in the gas industry as a communication controller in automatic process control systems
2. The interface converter is not a measuring instrument.
3. Operation of the controller-converter of interfaces is allowed at ambient temperature from minus 40 to plus 60°С.
TECHNICAL DATA
1. Power supply parameters of the Interface Converter Controller from an external DC source:
– rated supply voltage . . . – 12 V;
– valid valuesfrom . . . . – 8 to 16 V;
– intrinsic current consumption at full load . . . . . . – no more than 180 mA.
– power consumption at rated voltage – no more than 2.2 W.
Power lines HART:
– nominal . . . . . . . . . – 12 V;
– admissible . . . . . . . . – 8 – 16 V;
2. Speed of digital information exchange through communication channels . . . – from 600 to 57,600 bps.
3. Overall dimensions of the Interface Converter Controller do not exceed . . . . . – 160 x 100 x 60 mm
4. The weight of the Interface Converter Controller does not exceed 0.25 kg.
5. The service life of the Interface Converter Controller is 12 years.
6. The company provides warranty service for the controller-converter of interfaces within 24 months and after-sales service. throughout the service life.
INSTALLATION AND SERVICE
1. The interface converter is made in a plastic case with brackets for mounting on a DIN rail In this case, the converter must be protected from the direct action of precipitation.
2. The controller-converter of interfaces is intended for operation in an explosive zone and in rooms at a temperature ambient air from minus 40 to plus 60 °C.
3. Climatic version of the Controller-converter interfaces C-4 according to GOST 12997-84. The degree of protection from the actions of the environment environments IP30 according to GOST 14254–80.
4. The company provides warranty service for the controller-converter of interfaces within 24 months and service service throughout the entire service life.
DOCUMENTATION (Manual)
Interface Converter Controller.
SOFTWARE
manual.pdf – Instructions for the operation of the “HostWin” program in the presence of the “Initiative Interface Converter” as part of the FLOUTEC-TM measuring complex.